Palisade Specification
Palisade Fencing offers a cost effective and efficient solution to deter crime and vandalism and is designed to provide a formidable barrier.
From a low risk perimeter demarcation through to the protection of installations categorised as being of significant strategic importance, we offer a specification for your consideration.
A range of heights from 0.6m to 4.0m are available with a number of optional pale heads to suit a variety of duties.
Our in house fabrication team can manufacture gates in any size and style from single or double leaf or sliding and canteliver to complement your fencing.
Automation available on all gates.
All palisade fencing and gates can be supplied either galvanized or galvanized and powder coated to suit individual requirements.
We carry a large stock of palisade fencing and gates
A standard palisade fencing panel is constructed from hot and cold rolled steel sections supplied for assembly on site. Panels consist of 17 vertical pales manufactured in "D" or "W" profile with a choice of tops. The pales are fixed to rolled steel angle horizontals which are supported by 102 x 44 joist posts.
A fish plate passes through a slot in the post and secures the horizontal rail captive in its position. The pales are connected to the horizontals to form the panel and are held securely together by utilising vandal resistant security fasteners.
Palisade Fencing is supplied in 2.75m wide standard panels for easy assembly on site. Special panels and posts to step or rake can be supplied if required. Non standard posts for cranking over walls, or base plated for fixing to concrete are also available.
D Section Pale is available in 3 thicknesses:
- 3.00mm - general purpose
- 3.50mm - security purpose
- 4.00mm - special order
D Section Pale is available in 3 thicknesses:
- 1. Square Top
- 2. Triple Point Top
- 3. Single Point Top
- 4. Round Top
- 5. Round and Notch Top
W Section Pale is available in 3 thicknesses:
- 2.00mm - general purpose
- 2.50mm - security purpose
- 3.00mm - special order
W Section Pale is available in 3 thicknesses:
- 1. Triple Point Top
- 2. Single Point Top
- 3. Round Top
- 4. Round and Notch Top
A range of standard heights and specifications are available together with a range of complementary Palisade gates.
Stock Palisade Fencing Available
Standard Height (m) |
Pale Section |
Head Profile |
1.2 |
3.0mm "D" |
ROUNDED & NOTCHED |
1.5 |
3.0mm "D" |
ROUNDED & NOTCHED |
1.8 |
3.0mm "D" |
ROUNDED & NOTCHED |
1.8 |
3.0mm "D" |
TRIPLE POINTED |
1.8 |
2.0mm "W" |
TRIPLE POINTED |
2.0 |
3.0mm "D" |
ROUNDED & NOTCHED |
2.0 |
3.0mm "D" |
TRIPLE POINTED |
2.0 |
2.0mm "W" |
TRIPLE POINTED |
2.1 |
3.0mm "D" |
TRIPLE POINTED |
2.1 |
2.0mm "W" |
TRIPLE POINTED |
2.4 |
3.0mm "D" |
TRIPLE POINTED |
2.4 |
3.0mm "D" |
ROUNDED & NOTCHED |
2.4 |
2.0mm "W" |
TRIPLE POINTED |
2.4 |
2.5mm "W" |
TRIPLE POINTED |
3.0 |
3.0mm "D" |
TRIPLE POINTED |
Stock Palisade Gates Available
1.8m Single |
1.0m |
1.8m Double |
3.0m |
1.8m Double |
4.0m |
1.8m Double |
5.0m |
1.8m Double |
6.0m |
2.4m Single |
1.0m |
2.4m Double |
3.0m |
2.4m Double |
4.0m |
2.4m Double |
5.0m |
2.4m Double |
6.0m |
2.4m Double |
7.0m |
2.4m Double |
8.0m |
